Translate

Showing posts with label fingerweaving. Show all posts
Showing posts with label fingerweaving. Show all posts

Thursday, September 20, 2012

1st Annual Ingram Arts and Crafts

I have mentioned the 1st Annual Ingram Arts and Crafts Show to be held in Tupelo, OK on September 22, 2012 on my other blog Fabric Follies Two.  I'm a little late getting it up over here and I apologize for that.  It's been a busy month.


I love to weave.  Whether it's with my own hand spun or not, there's just something soothing about the rhythm and the immediate gratification that comes with something that comes together so beautifully and quickly.  This is the beginning of an envelope purse that I put together a couple of weeks ago.

This is how it turned out.. ;o)



These beaded stilettos are an exceptional tool when doing hand sewing.  It was very useful when making the coin purse below.


This fabric for this coin purse was at one time a sheet on our bed.. ;o)  I tore the 1/2 inch strips and then wove them onto a pocket weaving board (see photo in header), embroidered the ribbon rose grouping, sewed the back onto it and then cut and mounted it into the coin purse frame.

 These are hand spun embroidery threads.. most of them hand dyed using kool aid as the dye agent.

 Hand spun yarns, hand felted fabric.  All hand dyed or natural fiber.
 This needle book is made using hand spun.. on a spindle.. yarn, hand woven, hand spun and dyed embroidery yarn, hand felted fabric inside.  The only part not hand made is the cotton lining and sewing machine thread used to sew it in.
 Yarn, yarn and more yarn.. ;o)
These hand spun yarns were Rit dyed.  This was my first foray into the acid dyes.

There will be much more at the Show..  My Uncle Bobby is the most amazing "whittler" you have ever seen... He will be showing his planes and guns..  My Aunt Betty is a wonderful artist.  There will be other art projects shown also.. If you are near .. we would love to have you!

Monday, March 31, 2008

Of Painting and Sealing

It took a couple of days to paint everything, let it dry and then seal them with polyurethane. But it finally all came together...



I started to paint more on the bottom of the lucet, then decided that I just wanted something small and simple.. so there is a small flower on each side, then several coats of polyurethane.




I finished one nalbinding needle, then decided that would be more than I needed if I used all those blanks for needles...sooo... DH assisted and we put four of them together to come up with this 5 1/2 inch loom. All that I really did to the oak was sand all the edges smooth and make sure that nothing would cut the yarn as it pulled around it. All this was done yesterday morning. Yesterday evening I did the piece of test weaving. I can already tell that I will have to grab oldest son and have him tutor me a bit on how to do this..grin But all in all.. I didn't think it turned out too bad.


This spindle is a toy wheel with a very small center hole. The shaft is a bamboo skewer from the kitchen. I still had to sand a little so the skewer would fit, but it spins like a dream now. I let enough of the shaft push through that this spindle can be a bottom whorl or it can be a supported spindle. I will be trying to learn to use it as a supported spindle. I have some short, short poodle hair that I am dying to try to spin.. I think I will have to mix it with some wool... but this spindle will be good to try it with.

The four sets of finger weaving sticks were a no-brainer. All that had to be done was sandpaper the ends and length, sand, seal, sand, seal, sand, seal...lol

There is another spindle that was finished yesterday, but I'm so glad all the pics fit that I'm afraid if I try to add another one, I will be pushing my luck with Blogger...lol So will put it up tomorrow...

I've had a couple of people ask about using a lucet.. The top You Tube video in sidebar is a video of how to use a lucet. Have a look....

Friday, March 28, 2008

W I F #5 & Lucet



It's been a fairly good week...weigh in today...188..ta da...


We spent a little time out in the shop yesterday. These are nalbinding blanks, fingerweaving rods, Lucet and spindle parts. The all need to be completed, but I couldn't wait to see if I could work the Lucet. I only had inch and a half wide piece of oak, so I drew out what I thought would work and DH cut it out for me.
I used the Dremel to sand it down, but let me tell ya... a person needs a little time and practice using the Dremel...lol My poor little lucet has some real ocean waves... But it worked really well. I had to spend some time getting used to the small working area between the forks...about 3/4 inch... but when I did get it figured out it whizzed right along just like a grown up... Today I will finish sanding with some sandpaper. I think I will figure out some way to paint a tiny floral on the hand piece and then finish with something that will show the grain of the wood. May have to ask DSIL and find out what will work. I am trying to stay with whatever would be available around 800 AD... may not make it tho... sure like to use acrylic paints...hmmm